The Anytone is capable of receiving and transmitting on the band of PMR446. Since transmitting is not legal (power must be 0,5W and antenna must be fixed), here is what you need to set up in qdmr.

  1. (optional) Create a Scan list “PMR446”

Tab Channels:

Repeat following steps for all 16 channels:

  1. Add Analog Channel
  2. Set RX Frequency to correct frequency and TX Frequency to a frequency within your region setting.
  3. Check Rx Only
  4. (optional) Set Scan List to “PMR446”
  5. Set Bandwidth to “Narrow (12.5 kHz)”

Afterwards you must create a corresponding Zone to make the channels available.